亚洲区和欧洲区一二三四,日本99,日本三级做a全过程在线观看 ,亚洲精品视,国91精品久久久久9999不卡,三年大片大全在线观看免费观看第22集

性能特點:

Performance characteristics:

運用保護角設計和鏡面涂層技術，達到防眩光效果, 能有效減少對作業、施工人員眼睛的刺激，避免產生不適和疲勞感。

Application of the protection angle design and mirror coating technology, reach the antiglare effect, can effectively reduce the operation, construction personnel irritation of the eyes, to avoid discomfort and fatigue.

多重防振結構設計和高強度合金外殼，確保其在路基路軌、橋涵隧道等高頻震動中長期安全工作。

Multiple anti vibration structure design and high strength alloy casing, to ensure that the roadbed tracks, bridges and tunnels in high frequency vibration of long term safe operation.

特殊的密封和表面涂層處理, 確保燈具在潮濕、高溫等惡劣環境中永不腐蝕, 永不生銹。

Seal and special surface coating, ensure lamps and lanterns never in damp, high temperature and other harsh environment corrosion, never rust.

采用高光效、長壽命的LED光源, 功率因數大于0.85, 光效高，透光性好，壽命長達80000小時。

Using LED light source with high luminous efficiency, long life, power factor greater than 0.85, high light efficiency, good light transmission, long service life of 80000 hours.

座式、吸頂式和壁掛式等多種安裝方式，照射角度可根據環境需要在上下180°大范圍內調節。

Seat type, absorbing many top and wall hanging type installation, with adjustable irradiation angle degree big scope according to the environment on the 180.

使用范圍

Range of use

¤ 適用于爆炸性氣體環境的1區、2區場所。

The following is applicable to explosive gas environment zone 1, zone 2 locations.

¤ 適用于ⅡA、ⅡB類爆炸性氣體環境。

The following applies to Ⅱ A, Ⅱ B explosive gas environment.

¤ 適用于可燃粉塵環境20區、21區區場所。

The following applies to flammable dust atmosphere 20 District, 21 District places.

¤ 適用于T1-T4（T6)組溫度組別

The following applies to T1-T4 (T6) group temperature group

¤ 適用于防護要求較高的環境所使用。

The following applies to require higher environment use.

¤ 適用于石油開采、冶煉、化工、軍工儲備等企業的危險環境及海洋石油平臺，油輪等場所作普通照明及作業照明之用。

The following applies to oil mining, smelting, chemical, military reserve enterprise risk environment and offshore oil platforms, tankers and other places for general lighting and lighting for.

使用方法:

Method of use:

根據現場環境和照明需要，確定燈具的安裝位置和方式后將其固定安裝；按燈具到

According to the site environment and lighting needs, determine the lamps and the installation position after the fixed installation; according to lighting

220V電源接點的距離，備好相應長度的φ6~8mm電纜線。

220V power supply contact distance, prepare the length of φ 6~8mm cable

用手按壓燈頭下端兩個開蓋按鈕，掀開燈具前蓋，將準備好的電纜線一端通過引入裝置的壓緊螺母引入燈腔內，按照接線座上標明的極性， 火線接“L”端，零線接“N”端，地線接到接地端，再將引入裝置的壓緊螺母旋緊。

Hand press holder is two cover open button, open the front cover of the lamp, the cable will be ready by the end of the pressing nut into the device into the lamp cavity, in accordance with the polarity of the marked connection seat, FireWire "L" end, then the zero line "N" end, ground to ground, the compression nut tighten the lead-in device.